Klipsch THX-6000-LCR-R 2-Way LCR Speaker (Single, Right)

Klipsch K1068689 THX-6000-LCR-R 2-Way LCR Speaker (Single, Right)

Description

Enjoy versatile placement options with the right-oriented Klipsch THX-6000-LCR-R 2-Way LCR Speaker. It features 1/4"-20 bolt holes on the back for wall or ceiling mounting with a compatible mount and can be used at any position in a home theater system – in the front at the left, center, or right position, or as a surround channel. When used as half of a stereo pair, the THX-6000-LCR-R should be installed as the right channel due to its tweeter placement. The THX-6000-LCR-R uses a 1" titanium dome tweeter mated to a 90 x 60° Tractrix horn for enhanced highs, and two 6.5" Cerametallic anodized-aluminum cone woofers for mids and lows down to 48 Hz. The THX-6000-LCR-R accepts up to 150W of RMS power from your amplifier.

Features

• 150W RMS Power Output
• 2-Way Speaker Design
• Dual 6.5" Cerametallic Cone Woofers
• 1" Titanium Dome Tweeter

  THX Ultra2-Certified

  Designed primarily for front left, center, or right reproduction in high-performance home theaters, the THX-6000-LCR-R can also be used as a surround channel or in a combination home theater/music system. It's rear-panel 1/4"-20 threads make it compatible with wall or ceiling speaker mounts rated for 40 lb or higher.

  Right-Oriented LCR Design

  While the THX-6000-LCR-R can be used as either a left, center, or right speaker, when used as half of a stereo pair, it should be installed as the right channel due to the positioning of the tweeter and horn.

  10 x 6", 90 x 60° Tractrix Horn

  The 10 x 6", 90 x 60° Tractrix horn helps raise the efficiency of the 1" titanium-dome compression tweeter, optimizing its radiation pattern. The horn is designed to enable the speaker to meet THX Ultra2 directivity specifications without the lobing and comb filtering effects of multi-tweeter options. Its dual 6.5" woofers are designed with large, magnetically shielded motor structures that drive rigid, low-mass Cerametallic anodized-aluminum cones for high output with low distortion.

  Rabbet and Dado Construction

  The speaker features a rabbet and dado locked panel construction design to help ensure sonic purity, consistency, and reliability.

  Specifications

  Speaker System
  Speaker Configuration	2-Way
  Power Handling	150 W RMS
  	600 W Peak
  Bi-Amp Capability	Yes
  Drivers	2 x 6.5" / 165.1 mm Cerametallic Cone Woofer
  	1" / 25.4 mm Titanium Dome Tweeter
  Enclosure Type	Bass-Reflex
  Ports	1 x Front-Firing
  Frequency Response	48 Hz to 20 kHz (±3 dB)
  Impedance	8 Ohms
  Magnetic Shielding	Yes
  Wired Connectivity	2 x Binding Post Pair Input
  Crossover	1400 Hz
  Sensitivity	97 dB
  Physical
  Placement & Mounting Options	Tabletop/Bookshelf
  	Ceiling-Mount, Wall-Mount (with Optional Hardware)
  Cabinet Material	MDF
  Dimensions	17 x 15 x 12.5" / 43.2 x 38.1 x 31.8 cm (with Grille)
  Weight	39.0 lb / 17.7 kg