Description
Klipsch K1068690 THX-6000-LCR-L 2-Way LCR Speaker (Single, Left)
Description
Enjoy versatile placement options with the left-oriented Klipsch THX-6000-LCR-L 2-Way LCR Speaker. It features 1/4"-20 bolt holes on the back for wall or ceiling mounting with a compatible mount and can be used at any position in a home theater system – in the front at the left, center, or right position, or as a surround channel. When used as half of a stereo pair, the THX-6000-LCR-L should be installed as the left channel due to its tweeter placement. The THX-6000-LCR-L uses a 1" titanium dome tweeter mated to a 90 x 60° Tractrix horn for enhanced highs, and two 6.5" Cerametallic anodized-aluminum cone woofers for mids and lows down to 48 Hz. The THX-6000-LCR-L accepts up to 150W of RMS power from your amplifier.Features
- 150W RMS Power Output
- 2-Way Speaker Design
- Dual 6.5" Cerametallic Cone Woofers
- 1" Titanium Dome Tweeter
THX Ultra2-Certified
Designed primarily for front left, center, or right reproduction in high-performance home theaters, the THX-6000-LCR-R can also be used as a surround channel or in a combination home theater/music system. It's rear-panel 1/4"-20 threads make it compatible with wall or ceiling speaker mounts rated for 40 lb or higher.
Right-Oriented LCR Design
While the THX-6000-LCR-R can be used as either a left, center, or right speaker, when used as half of a stereo pair, it should be installed as the right channel due to the positioning of the tweeter and horn.
10 x 6", 90 x 60° Tractrix Horn
The 10 x 6", 90 x 60° Tractrix horn helps raise the efficiency of the 1" titanium-dome compression tweeter, optimizing its radiation pattern. The horn is designed to enable the speaker to meet THX Ultra2 directivity specifications without the lobing and comb filtering effects of multi-tweeter options. Its dual 6.5" woofers are designed with large, magnetically shielded motor structures that drive rigid, low-mass Cerametallic anodized-aluminum cones for high output with low distortion.
Rabbet and Dado Construction
The speaker features a rabbet and dado locked panel construction design to help ensure sonic purity, consistency, and reliability.
Specifications
Speaker SystemSpeaker Configuration 2-Way Power Handling 150 W RMS 600 W Peak Bi-Amp Capability Yes Drivers 2 x 6.5" / 165.1 mm Cerametallic Cone Woofer 1" / 25.4 mm Titanium Dome Tweeter Enclosure Type Bass-Reflex Ports 1 x Front-Firing Frequency Response 48 Hz to 20 kHz (±3 dB) Impedance 8 Ohms Magnetic Shielding Yes Wired Connectivity 2 x Binding Post Pair Input Crossover 1400 Hz Sensitivity 97 dB PhysicalPlacement & Mounting Options Tabletop/Bookshelf Ceiling-Mount, Wall-Mount (with Optional Hardware) Cabinet Material MDF Dimensions 17 x 15 x 12.5" / 43.2 x 38.1 x 31.8 cm (with Grille) Weight 39.0 lb / 17.7 kg