ViewSonic 27 Inch Full HD 1080p LED Monitor with DVI and VGA Inputs - Certified Refurbished

ViewSonic VA2746M-LED-S 27 Inch Full HD 1080p LED Monitor with DVI and VGA Inputs - Certified Refurbished

Description

The VA2746M-LED 27" Widescreen LCD Monitor from ViewSonic comes complete with a Full HD 1920 x 1080 resolution, a 3.4 ms response time, 1,200:1 contrast ratio, and a brightness rating of 300 cd/m². Utilize either the DVI-D or VGA inputs to connect this display to a variety of PC configurations. Additionally, the monitor is VESA compatible allowing you to mount it to the wall or attach the included stand. Once set up, you can view the display from nearly any perspective as it supports 170° horizontal and 160° vertical viewing angles.

Features

• 27" Widescreen LED Backlit Display
• 1920 x 1080 Resolution
• 1,200:1 Contrast Ratio
• 300 cd/m² Brightness
• 3.4 ms Response Time
• 2 x 2 Watt Speakers
• DVI-D & VGA Inputs

Full 1080p Performance

The VA2746M-LED features a Full HD 1080p 1920x1080 resolution for enhanced pixel-by-pixel image performance. Additionally, the 16:9 widescreen ratio minimizes eye fatigue even after hours of viewing and is compatible with multi-window viewing without toggling.

MEGA Dynamic Contrast Ratio

Dynamic contrast ratio detects the brightness of an image, and automatically adjusts the backlight to maximize the monitor's color range and contrast. Dynamic contrast ratio technology enables the accurate reproduction of images.

LED Technology

This monitor uses white LEDs (Light Emitting Diodes) as the light source. LEDs provide a variety of benefits, including about 50% less power consumption compared to a traditional CCFL monitor, as well as an environmentally friendly mercury-free backlight, a low EMI (Electro Magnetic Interference), and all in a slimmer and lighter monitor.

Energy savings may vary based on cost, actual usage, and other factors

ENERGY STAR Certified

With its mercury-free backlight and low energy consumption, the ENERGY STAR certified VA2746M-LED saves on your electricity bill.

Eco-Mode Conserves More Energy

ViewSonic's proprietary Eco-mode function is built into all LED displays, offering options to "optimize (65%)" or "conserve (50%)". Both modes reduce display brightness and conserve up to 25% energy. Especially in low ambient light, Eco-mode adjusts brightness and improves visibility while reducing eye fatigue and prolonging the display's lamp life.

Energy savings may vary based on cost, actual usage, and other factors

Dual Integrated Stereo Speakers

The ViewSonic VA2746M-LED has two integrated 2 watt stereo speakers for enhanced multimedia performance with crystal-clear stereo sound.

VESA Mountable

The VA2746M-LED features a 100 x 100mm VESA-mountable design that allows you to take the monitor off the stand and mount the display on a wall. You can easily detach the base by unscrewing four screws and then mounting the display on its new stand or wall mount.

Specifications

LCD
Type	Color a-Si TFT Active Matrix LCD
Display Area (HxV)	23.5 x 13.2" / 59.69 x 33.53 cm vertical
	27" / 68.58 cm diagonal
Resolution	1920 x 1080
Contrast Ratio (Typical)	1,200:1
Dynamic Contrast Ratio	20,000,000:1
Viewing Angles	Horizontal: 170º
	Vertical: 160º
Response Time	3.4 ms
Backlight Life	30,000 hours (min)
Brightness	300 cd/m²
Panel Surface	Anti-glare, hard coating 3H scratch resistant
Video Input
Analog/Digital	RGB analog (0.7 / 1.0 Vp=p. 75 ohms) / DVI (TMDS, 100 ohms)
Frequency	Fh: 24~82 kHz
	Fv: 50~75 Hz
Sync	Separate Sync
Compatibility
PC	PC compatibles (VGA up to 1920 x 1080 non-interlaced)
Mac	Up to 1920 x 1080
Connectors
Analog/Digital	15-pin mini D-sub (VGA) / DVI-D (V 1.3 with HDCP)
Audio Input	3.5 mm mini jack
Power	Internal power board, 3-pin plug (CEE22)
Audio
Speakers	2 x 2 watt
Power
Voltage	100-240 VAC (universal), 50-60 Hz
Consumption	38 watt (typical) / 42 watt (maximum)
Controls
Basic Controls	Power, 1, up, down, 2
OSD	Auto Image Adjust, Contrast/Brightness, Input Select, Audio Adjust, Color Adjust, Information, Manual Image Adjust, Setup Menu, Memory Recall (See user guide for complete OSD functionality)
Operating Conditions
Temperature	32-104°F / 0 to 40°C
Humidity	10 to 90% (non-condensing)
Other Specifications
Tilt	Forward 5°, back 20°
VESA Mount	100 x 100 mm
Regulations	CE, CB, WEEE, RoHS, REACH SVHC List, TCO5.1, ENERGY STAR 5.0, Windows 8, Window 7, UL, cUL, FCC-B / ICES-003B, TUV-S, Nemko ERGO, GOST-R+Hygienic, UkrSEPRO, ErP, CCC, CEL Level 1, BSMI, PSB, C-tick, KC, e-standby
Power Management	ENERGY STAR standards
Dimensions (WxHxD)	With Stand: 25.4 x 17.4 x 9.8" / 645.3 x 442.5 x 247.6 mm
	Without Stand: 25.4 x 15.7 x 2.2" / 645.3 x 398.8 x 55.9 mm
Weight	With Stand: 11.6 lb / 5.3 kg
	Without Stand: 10.7 lb / 4.9 kg
Packaging Info
Package Weight	15.1 lb
Box Dimensions (LxWxH)	28 x 21 x 6"